Here you can find the default IP address and the username and password for the user interface of the TP-LINK TL-WR802N 300Mbps Wireless N Nano router. This site also contains information about the preconfigured Wi-Fi settings of the device. In the bottom part of this website, you will find a manual for accessing the user interface of this router and resetting its factory settings.
Login data for the user interface
Preconfigured Wi-Fi settings
TP-LINK; Default settings for TP-LINK routers. Here you will find the combinations of IP address, username and password that are used most commonly as the default for TP-LINK routers to access the user interface. Moreover, you can see the standard settings of all available router models from the manufacturer on this site. Change Your WIFI Name and Password in TP-LINK router, How To See Your Wifi Password And Change It In a Minute Blog: Facebook: http. A faster way to connect to WiFi. Simply go to “Advanced-Wireless-Wireless Settings”, click “Sharing Network” and a QR code will generate. Open the camera app on your devices and scan this QR code. Your devices will automatically connect to the you TP-Link router’s WiFi. Note: your camera or app will need to support QR code scanning. Configuring Wi-Fi Router TP Link AC 750 Archer C20: Internet, Wi-Fi, DHCP, Password. Read this article to find out how to configure a Wi-Fi router with the example of TP-Link AC750 Archer C20.Today I will tell you how to configure basic router settings to enable Internet access, create and set up a Wi-Fi network. If you are using a TP-Link ID to log in to the web management page, the Password Recovery feature will be disabled. To manage the TP-Link ID, go to Basic TP-Link Cloud. Log in to the web-based interface of the router.
Access to the user interface
Accessing the user interface is necessary when you want to change the router configuration. For the TP-LINK TL-WR802N, you have to do the following steps for access:
- Put router into operation
- Connect the device via Wi-Fi* or a network cable with the router
- Open web browser
- Enter IP address or URL in the address line and confirm with ‘Enter’ button
- Enter username and password in the open user interface and confirm again
* Make sure that your router’s Wi-Fi is activated.
Reset default settings
Resetting default settings is especially helpful when you have changed and forgotten the login data for the user interface. Please consider that not only will settings like IP address, username and password be set to factory settings, but all configurations you may have made will as well.
Execute hardware reset
To reset the TP-LINK TL-WR802N to its default settings, you have to do the following steps:
- Put router into operation
- For at least 5 seconds, press the Reset button
- Device restarts automatically
- Restoration of standard settings is finished
Execute software reset
With the TP-LINK TL-WR802N, you can restore the factory settings with the installed software. Log in to the user interface of the router with your access data and execute the steps that are described in the user handbook.
Tp Link Extender Password
After you have successfully executed the steps mentioned above, the configuration of the router will be reset to factory settings. If you want to log in to the user interface, you have to use the preset login data.